Home / Sites and facilities / Construction site theft prevention

Construction site theft prevention that catches intruders before tools go missing.

Cable, tools and fuel walk off empty sites at night, and the loss shows up at the morning briefing. ZoneIntel AI alerts the security officer when someone enters after hours, while they are still on site.

Construction site theft prevention camera view of a yard at night through the fence, with one person detected
Real-time alert01:52:20
Camera still of a yard at night with one person detected

A person is inside the laydown yard near the cable drums at 01:52, after work hours.

Sent to
The site security officer by app push and SMS, and the project control room by API.
No response
The project manager is alerted if nobody acknowledges within 3 minutes.

Alerts arrive in under 10 seconds by app, SMS, Teams, email or your video system. Simulation.

What goes missing from an empty site

Copper cable, power tools, fuel and small plant are the usual targets once the last shift leaves. Each loss delays work while items are replaced.

In March 2023, the Singapore Police Force arrested a man over copper cable thefts from a site near Stadium Walk. The thefts ran from December 2022 and were traced through CCTV footage.

Night log · Sample siteArmed 19:00 to 07:00
19:05Main gate shut, last vehicle out. Zones armed.
22:40Hoarding lights on, all 18 cameras online.
01:52Person inside the laydown yard near the cable drums. Officer sent.
01:58Officer on scene, person gone, drums counted. Case closed.
06:30Morning report sent to the project manager.
Sample night log with made-up data. Simulation.

How construction site theft prevention works on your cameras

Zones armed after work hours

Each zone arms when the last shift leaves and disarms at the morning briefing. Weekends and public holidays are set per site.

Stores and laydown areas

Cable drums, tool containers, fuel tanks and the plant yard each get their own zone and their own alert.

Vehicles at the gate

Every vehicle after hours is logged with a clip and checked against the delivery schedule.

The morning report

The project manager gets every alarm, decision and clip from the night before the first shift.

Results

Fewer tools and materials go missing, because officers reach the yard while the intruder is still there. When theft does happen, the police get the clip and the time. During the day, the same cameras can also check PPE and machinery zones.

Questions

How do you prevent theft on a construction site?

The best way is to catch intruders while they are still inside the site. ZoneIntel alerts the security officer when someone enters an armed zone after hours, with the clip and the exact spot.

Do we need new cameras on the site?

Most sites use the IP cameras already on the hoarding, gates and stores. We review one night of footage and show where an extra camera would close a gap.

Does it work when the site internet drops?

The site server keeps detecting and recording during an outage. Remote alerts wait until the link returns, and every event stays in the night log.

How does it tell our night shift from intruders?

ZoneIntel gets the night work schedule, the permit list and the expected vehicles. People and vehicles that match the zone, time and permit are logged with no alarm.

Who responds when an alarm is real?

Your site security officer, security agency or licensed monitoring centre responds under your procedures. ZoneIntel sends them the clip and the spot. It closes the case when the camera shows the area clear.

Send us one night of footage from your site cameras.

We send back a night log for your site with every person and vehicle after hours and the clip behind each one.