Home / Cities and public spaces / Silt and drain compliance

Silt and drain compliance CCTV that keeps your site ready for inspection.

A silty discharge after rain is often found first by the inspector. ZoneIntel AI checks your outlets and channels on the site cameras you already have. Each fix goes to the site team, and the dated record is ready for the inspector.

Drain grating beside a site road marked as blocked with debris, and standing water in the channel
Simulation.

Site CCTV over earth control measures is rarely watched

The cameras are there because the permit requires them, so nobody watches them closely. Preparing the record for each inspection takes hours.

  • Silty water found first by the inspector
  • Blocked channels and outlets noticed after the rain
  • Hours spent pulling clips for the record
  • No proof each defect was fixed

How silt and drain compliance checks work

Cameras already pointed at outlets, channels and the site boundary are enough to start. We check each view in the footage review.

  1. Watch points are set

    Mark outlets, channels, silt fences and the site exit on each camera. Set check times around rain and working hours.

  2. Water and blockages are checked

    ZoneIntel looks for muddy water at outlets, debris and silt in channels, and mud carried onto the road at the exit.

  3. The site team is told

    Each defect goes to the site engineer or the supervisor for earth control measures (ECM). It carries the clip and a deadline.

  4. Fixed on camera

    The same view is checked again. The defect closes when it is clear, and the log is updated for the record.

Results

ResultPilot measure
Discharge caught on siteSilty water events found on camera, and minutes to fix.
Earth control checked every dayChecks completed per day, and defects found and closed.
The record is readyHours spent preparing records, before and after.

Defects are fixed on the day they appear, and the inspector sees a clean, dated record. Stop-work orders and fines become less likely.

Blocked site drain06:55
Drain grating beside a site road blocked with debris, with water standing in the channel

Debris is blocking the drain grating on the east boundary and water is standing in the channel.

Where
Drain cam E-14, east boundary channel
Sent to
ECM supervisor on duty, by Teams and email
If nobody responds
The site engineer is alerted after 30 minutes, then the project manager.
Example alert with made-up names. Simulation.

Questions about silt and drain compliance

Does this replace our ECM officer?

ZoneIntel supports the ECM officer. It watches the cameras between walks and tells the officer what needs fixing. It also writes up the record for the officer to approve.

Do we need new cameras?

Most sites need no new cameras. ZoneIntel runs on the site's existing IP cameras. The footage review shows where a camera should point.

Can it tell silty water from clean water?

It checks the colour and spread of water at each outlet against the clear view. Muddy water is flagged for a person to confirm. We test this on your own footage in the pilot.

Who sees the alerts?

The people you choose see them, by role. That is usually the site engineer, the ECM supervisor and the project manager.

Is it only for Singapore?

Any site with drainage and earth control duties can use it. We start in Singapore, Saudi Arabia and the UAE. Gulf projects are delivered with local partners.

Earth control log from your own footage

Share a day of footage from your outlet and channel cameras through a secure link. We send back the earth control log ZoneIntel would have written, and delete the footage when you ask.