Home / Cities and public spaces / Crowd monitoring
Crowd monitoring that warns staff before an area gets too full.
A crowd at a station or event gate builds in minutes, and staff often see it too late. ZoneIntel AI runs crowd monitoring on your CCTV and alerts the duty manager while staff still have time to open gates.

Concourse area C2 holds 16 people, about 4 per square metre. The station set its first level at 3.
Walking and standing people are counted apart
A standing group at a gate line builds a crowd faster than people walking through. ZoneIntel counts both and shows staff where groups have stopped.
Levels set by the venue
Each area has a size and a safe level. ZoneIntel reports people per square metre and the trend over the last few minutes. Alerts follow the levels below.
| Level in the area | What staff see | Typical response |
|---|---|---|
| Under the first level | Count and trend on the dashboard | No action |
| First level reached | Alert to the duty manager with the clip | Open more gates, deploy staff |
| Safe level reached | Alert escalated to the operations supervisor | Hold entry, use other routes |
| Back under the first level | Case closed with the photo | Normal operation |
Results
| Result | Pilot measure |
|---|---|
| Build-up seen early enough to act | Minutes between the first alert and the safe level |
| Staff sent to the right gate | Alerts answered within the set time |
| A record for every event day | Peak counts per area, with clips |
Staff open gates and change routes before people are pressed together. After each event, the venue has a record for its safety review.
For the 2025 Hajj season, SDAIA’s Sawaher platform linked more than 5,000 cameras across more than 80 sites.
Source: Arab News
Closed with photo evidence
A crowd case closes when the count in the area is back under the first level, with a photo from the same camera.


- 18:07Area C2 reaches about 4 people per square metre. The duty manager is alerted.
- 18:09Staff open the second gate and send people down the west stairs.
- 18:15The count falls as the next train leaves.
- 18:21Back under the first level, and the case closes with the photo.
Questions about crowd monitoring
How does crowd monitoring work on CCTV?
Crowd monitoring counts the people inside a marked area and divides by its size. That gives people per square metre. ZoneIntel compares the figure with the venue’s level and alerts staff before it is reached.
Does ZoneIntel AI identify people in a crowd?
Crowd density analytics count people and never identify them. They keep no face templates or identity records, and shared clips show blurred faces. This helps the city's privacy review for each public space.
What density level should trigger an alert?
The venue sets its own levels with its safety adviser. Many use a first alert well below the planned maximum and a second at the maximum. That gives staff time to open gates or hold entry.
Can it count people walking through a gate?
ZoneIntel counts people crossing a line drawn on the camera, in each direction. Gates and corridors report flow per minute next to the density in the areas around them.
Does it work for temporary events?
Temporary events use cameras added for the event and a ZoneIntel server on site. Areas, levels and alert routes are set up before the gates open.
Related use cases
See also pedestrian safety analytics.
Crowd count from your own footage
Share footage from one busy day through a secure link. We send back counts per area, peaks and the alerts ZoneIntel AI would have raised.