Home / Sites and facilities / Integrations

ZoneIntel AI connects to the camera and door systems you already run.

Security teams have already paid for cameras, recorders, door controllers and alarm panels. ZoneIntel AI connects to each of them through open standards and APIs, so nothing has to be replaced.

ZoneIntel AI IntegrationsOpen standards and APIs
CamerasONVIF and RTSP streams from fixed and PTZ camerasVideo in
Video management systemsLive and recorded streams, events and bookmarks by APIVideo in, alarms out
Access controlDoor forced and held-open events by API or event feedEvents in
ZoneIntel AI server on your networkChecks each event on video, then sends only verified alarms and cases
Alarm panelsPanel alarms by relay contact, serial link or APIEvents in
Monitoring-centre softwareVerified alarms with the clip by API or webhookAlarms out
Work orders and messagesCases and alerts by REST API, webhook, email or SMSCases out
Simulation. Diagram of connection types.

How connection works

An integrator connects each system once, during setup.

  1. Cameras by ONVIF or RTSPThe server reads the streams your cameras already send, directly or through your recorder.
  2. Events come inDoor and panel alarms arrive by API, event feed or relay contact.
  3. Each event is checked on videoZoneIntel looks at the nearest camera and confirms or clears the event.
  4. Results go outVerified alarms and cases go to your control room software or work-order system.

What connects

IT teams and integrators get a short list of connection types, each on an open standard or a documented API.

  • CamerasAny camera with an ONVIF or RTSP stream, fixed or PTZ.
  • Video management systemsLive and recorded video in, alarms and bookmarks back by API.
  • Access control and alarm panelsDoor and panel events in, each checked against video.
  • Monitoring-centre and work-order softwareVerified alarms and cases out by REST API or webhook.

Questions about connection

Which cameras does ZoneIntel AI work with?

ZoneIntel works with any camera that sends an ONVIF or RTSP stream. That covers most IP cameras in use today. Analogue cameras connect through an encoder or a recorder that sends RTSP.

How does it connect to a video management system?

The server takes live and recorded streams from the video management system. Verified alarms go back by API as events or bookmarks, so operators keep working in the screen they know.

How do access control and alarm panels connect?

Door controllers send forced-door and held-open events by API or event feed. Alarm panels connect by API, serial link or relay contact. ZoneIntel checks each event on the nearest camera.

Is the API documented?

The REST API and webhooks are documented for integrators. They cover alarms, cases, clips, camera health and reports. Your integrator receives the reference during setup.

Send us your list of systems.

Tell us the cameras, recorders, door controllers and panels you run. We reply with how each one connects.